Table of Contents
Advertisement
Others
Optional accessories
External Flash (optional)
When you use the flashes (optional: DMW-FL220, DMW-FL360L, or DMW-FL580L), a
wider effective flash range is provided than with the flash (supplied).
Preparation
Set the camera [ON/OFF] switch to [OFF].
Removing the hot shoe cover
The hot shoe cover is already attached to the hot shoe at the time of purchase.
Remove the hot shoe cover by pulling it in the
direction indicated by arrow
it in the direction indicated by arrow
• Be sure to attach the hot shoe cover when the hot shoe
is not in use.
• Keep the hot shoe cover safely after removing it so that
you do not lose it.
■
Using the flash (DMW-FL360L: optional)
Attach the external flash to the hot shoe and then turn on the camera and the external
flash
Set the menu
→
Press
to select [Flash Mode] and press [MENU/SET]
Press
to select the item and press [MENU/SET]
• While the external flash is connected, the following icons are displayed.
:
External flash Forced ON
: External flash Red-Eye Removal Forced ON
: External flash Slow Sync.
: External flash Red-Eye Removal Slow Sync.
: External flash Forced OFF
• Signal-flashing with wireless flashes is also disabled.
*
When the flash mode is set to [AUTO] or [MANUAL] on the external flash, you cannot select
the item.
291
[Rec] → [Flash]
while pressing
*
*
SQW0021
Advertisement
Table of Contents
