Panasonic Lumix DMC-LX100EBS Owner's Manual For Advanced Features page 245

[Send Images While Recording]
1
Set the menu
→ [New Connection] → [Send Images While Recording] → [AV device]
2
Select [Via Network] or [Direct] to connect
3
Select the device you wish to connect to
• When the connection is established, the confirmation screen for the transmission setting is
displayed. Check the setting and press [MENU/SET]. To change the send setting, press [DISP.]
button. (→271)
4
Take still pictures
• To change the setting or disconnect, press [Wi-Fi] button.
You cannot change the settings while sending still pictures. Wait until sending is complete.
(You can also close the connection by pressing
[Wi-Fi Function] → [Yes].)
245
Sending pictures to AV device
(→263)
(→226)
→ [Setup] → [Wi-Fi] →
Wi-Fi
SQW0021