Table of Contents
Advertisement
Frameo off. Never disconnect power when Frameo is running.
Settings
Through settings, you can personalize your frame to your needs.
My frame
Frame name:
Changes the name of your frame. This is also the name the connected friends and family will
see in their list of connected frames.
Frame location:
Changes the location of your frame. This is the location displayed on your
friends' and family's
which can help to distinguish frames from each other.
list of connected frames
Set language:
Sets the language throughout your frame.
Enable/Disable 24-hour format
Enables, and disables, 24-hour time format.
Set time zone
Sets the timezone that should be used on your frame.
Sleep mode:
frameo offers a sleep mode which turns off the screen to reduce power consumption while
you
e.g. are sleeping. Its default setting is to turn off the screen at 23:00 and turn on the screen
again at 07:00. To change this just set the sleep mode start/end time.
Your frame is not powered down or in standby, so you will still be able to receive photos
during sleep mode.
Manage photos
Show/hide photos:
Select which photos to hide by tapping the particular photos you wish to hide. Hidden photos
will NOT be deleted from your frame, you can always select them to be shown again.
ENG-8
Advertisement
Table of Contents
