The Schedule Recording/Timeshift Function Isn't Working; Anynet+ (Hdmi-Cec) Isn't Working - Samsung UN65KU7500 E-Manual

The Schedule Recording/Timeshift Function Isn't Working

When Timeshift or Schedule recording aren't working, these steps may help resolve the problem.
" This function is not available in the U.S.A. and Canada.
The problem
Schedule Recording cannot
be used.

Anynet+ (HDMI-CEC) Isn't Working

When Anynet+ (HDMI-CEC) isn't working, these steps may help resolve the problem.
The problem
Anynet+ does not
work.
I want to start Anynet+.
I want to exit Anynet+.
The message
"Connecting to
Anynet+ device..."
or "Disconnecting
from Anynet+ device"
appears on the screen.
The Anynet+ device
won't play.
Check if there is a USB device connected to the TV.
Recording will automatically stop if the signal becomes too weak. The Timeshift
function will not work if there isn't enough storage space on the USB device.
Confirm that the device is an Anynet+ device. The Anynet+ system supports Anynet+
devices only.
Check if the power cord of the Anynet+ device is properly connected.
Check the cable connections of the Anynet+ device.
Go to Anynet+ (HDMI-CEC)
(HDMI-CEC)) and see if
Check whether the TV remote control is in TV mode.
Check whether the remote control is Anynet+ compatible.
Anynet+ may not function when some other functions are active, including Channel
Search, Smart Hub, Initial Setup, etc.
If you have disconnected and then reconnected the HDMI cable, scan for devices again
or turn your TV off and on.
Check if the Anynet+ device is properly connected to the TV, and then select the
Anynet+ (HDMI-CEC) (
(HDMI-CEC)) menu to see if
Set Anynet+ (HDMI-CEC)
(HDMI-CEC)) to Off.
You cannot use the remote control when the TV is configuring Anynet+ or switching
to a viewing mode. Use the remote control after the TV has completed the Anynet+
configuration or has switched to a viewing mode.
You cannot use the play function when
Try this!
Try this!
( Settings
Anynet+ (HDMI-CEC) has been set to On.
Settings System
Anynet+ (HDMI-CEC)
( Settings System
Start Setup
System Expert Settings
Expert Settings
is set to On.
Expert Settings
is in progress.
Anynet+
Anynet+
Anynet+