Table of Contents
Advertisement
Section 3 - Configuration
Name:
Choose a name for the firewall rule.
Action:
Select to Allow or Deny transport of the data packets
according to the criteria defined in the rule.
Interface:
The Source/Destination is the TCP/UDP port on either the
LAN or WAN side.
IP Address:
Enter a beginning and ending IP address.
Protocol:
Select the transport protocol that will be used for the filter
rule.
Port Range:
Enter the desired port range for the filter rule.
Schedule:
Click Add New to access the Schedules window. Go to
Maintenance>Schedules for more information.
D-Link DIR-605L User Manual
36
Advertisement
Table of Contents
