Samsung 570 Installation Manual page 51

Cloning
USB Cloning is a function that allows you to download user configured settings (Picture,
Sound, Input, Channel, Setup, and Hotel Setup) from one TV set and upload the same
settings to other TV sets.
All user-defined settings from the TV (Master Set) can be copied to the USB device.
− USB Cloning support 2.0 Standard only.
y Clone TV to USB: This is an operation that copies the stored data from a specific area
of the TV EEPROM to the USB device.
1. Insert a USB drive into the USB port on the back of the TV.
2. Enter the Hotel Options by pressing these buttons in the following order:
MUTE 1 1
→ → →
3. Press the ▲ or ▼ button to select "Clone TV to USB", then press the
4. The message "Clone TV to USB" is displayed; press the
5. You can check the status of the USB cloning operation.
y In Progress: While copying data to the USB device.
y Completed: The copy operation was successfully completed.
y Failed: The copy operation was not successfully completed.
y No USB: No USB device connected.
y Clone USB to TV: This is an operation that uploads the data from a USB device to the
TV set.
1. Insert a USB drive into the USB port at the back of the TV.
2. Enter the Hotel Options by pressing these buttons in the following order:
MUTE → 1 → 1 →
3. Press the ▲ or ▼ button to select "Clone USB to TV", then press the
4. The message "Clone USB to TV" is displayed, then press the
5. You can check the status of the USB cloning operation.
y In Progress: Copying data to the USB device.
y Completed: The copy operation was successfully completed.
y Failed: The copy operation was not successfully completed.
y No USB: No USB device connected.
y No File: There is no file to copy on the USB device.
✎ Activate copying from USB to TV by pressing and holding the
seconds.
✎ The CLONE function only supports the same model series. (It does not work for
different model series.)
For fast, instant cloning during installation, insert a USB drive with master settings from the first TV, and press and
hold the Enter key for 5 seconds.
9 ENTER
→
9 → ENTER
ENTER button.
ENTER button.
ENTER button.
ENTER button.
ENTER key for 5
(ARC) (ARC) ( )
(5V 0.5A) (5V 0.5A) (5V 0.5A)
/ CLONING / CLONING / CLONING
Logo/Message
Cloning
d
Clone TV to USB
Clone USB to TV
Setting Auto Initialize OFF
Logo/Message
Cloning
d
Clone TV to USB
Clone USB to TV
Setting Auto Initialize OFF
51
English