Selecting A Function Using The Fn (Function) Button - Sony ILCE7SM2/B Instruction Manual

Selecting a function using the Fn
(Function) button
This button is used for setting up or executing functions used frequently in
shooting, except for functions from the Quick Navi screen.
1
Press the DISP on the control wheel to set the screen mode to
other than [For viewfinder].
2
Press the Fn button.
3
Select the desired item using v/V/b/B on the control wheel.
For a list of functions that can be registered and how to register them, see
page 34.
4
Select the desired setting by
turning the front dial, then press
z on the control wheel.
• Some setting values can be finely
adjusted by turning the rear dial.
To set the individual settings in the
dedicated screen
In step 3, select a setting item and press z on
the control wheel to switch to the dedicated
screen for the setting item. Set the items
according to the Operation guide.
Operation guide
33
GB