Sharp HRO00084 User Manual page 148

To Select a Network Automatically
Each time the power is turned on, your phone always
tries to connect to the preferred network.
If your phone is not connected to the network, you can
perform the following immediately to establish the
preferred network connection.
→
"Settings" "Network Settings" tab
→
Settings" "Select Network"
To Select the Network Manually
→
"Settings" "Network Settings" tab
→
Settings" "Select Network"
1.
Select the desired network.
To Edit the Preferred List
→
"Settings" "Network Settings" tab
→
Settings" "Select Network"
1.
Select the name of the network you wish to edit.
2.
Select "Insert" to insert over the selected position,
"Add to End" to insert at the end or "Delete" to
delete.
→
"Network
→
"Automatic"
→
"Network
→
"Manual"
→
"Network
→
"Set Preferred"
To Add a New Network
→
"Settings" "Network Settings" tab
→
Settings" "Select Network"
Network"
1.
Select "Add".
2.
Enter the country code (up to 3 digits).
3.
Enter the network code (up to 3 digits).
4.
Enter a new network name (up to 25 characters).
5.
Select the desired network type.
6.
Enter either 2G (GSM) or 3G for the network type.
Showing the Network Information
(M 9-d-d-1-3)
→
"Settings" "Network Settings" tab
→
Settings" "Network Information"
Information about the operator is displayed.
Off Line Mode (M 9-d-d-2)
When the Off Line Mode is set to "On", the phone cuts
off the network connections and stops searching for
available networks to connect.
→
"Settings" "Network Settings" tab
Mode"
1.
Select "On" or "Off".
→
"Network
→
"Add New
→
"Network
→
"Off Line
Settings 147