Table of Contents
Advertisement
5
8.4 HOW TO UPDATE THE FLASH ROMS FOR USB MODULES
How to Update the Firmware of the USB Module
[Purpose]
Referring to this section, rewrite the USB firmware when rewriting is instructed through service information.
[Tools to be used]
• iPod
• Firmware file ("Player.rom" file)
Note: Place the "Player.rom" file for updating in the root directory (top layer) of the iPod.
[Procedures]
1. Turn down the volume to minimum (- - - dB).
2. Press and hold the [i] and [POWER] keys for about 5
sec.
3. After about 20 sec., the current firmware version is
automatically displayed.
Note: When this version indication is displayed, the host
board is ready. Therefore, do not connect the iPod
until this indication is displayed.
4. Connect the iPod.
The name of the file for updating is always "Player.rom."
5. Counting continues until updating is completed.
6. Updating is completed.
Turn the power OFF.
5
6
Host preparing
for rewriting
SC-09TX
6
7
OSD
7
8
A
B
C
D
E
F
73
8
Advertisement
Chapters
Table of Contents
