LG 55LS35A Owner's Manual page 23

Tips for using USB storage devices
Only a USB storage device is recognizable.
y y
If the USB storage device is connected
y y
through a USB hub, the device is not recog-
nizable.
A USB storage device using an automatic
y y
recognition program may not be recognized.
A USB storage device which uses its own
y y
driver will not be recognized.
The recognition speed of a USB storage
y y
device may depend on each device.
Please do not turn off the display or unplug
y y
the USB device when the connected USB
storage device is working. When such a
device is suddenly separated or unplugged,
the stored files or the USB storage device
may be damaged.
Please do not connect the USB storage
y y
device which was artificially maneuvered on
the PC. The device may cause the product to
malfunction. Only use a USB storage device
which has normal music files, image files
or movie files.
Please use only a USB storage device which
y y
was formatted as a FAT32 file system, NTFS
file system by with the Windows operating
system. In case of a storage device format-
ted with a different utility programme which
is not supported by Windows, it may not be
recognized.
Please connect power to a USB storage de-
y y
vice (over 0.5 A) which requires an external
power supply. If not, the device may not be
recognized.
Please connect a USB storage device with
y y
the cable included by the device maker.
Some USB storage devices may not be sup-
y y
ported or operate smoothly.
File alignment method of USB storage devic-
y y
es is similar to Window XP and the monitor
can recognize up to 100 English characters.
Be sure to back up important files since data
y y
stored on a USB memory device may be
damaged. We will not be responsible for any
data loss.
If the USB HDD does not have an external
y y
power source, the USB device may not be
detected. So be sure to connect the external
power source.
- Please use a power adaptor for an external
power source.
If your USB memory device has multiple
y y
partitions, or if you use a USB multi-card
reader, you can use up to 4 partitions or USB
memory devices.
If a USB memory device is connected to a
y y
USB multi-card reader, its volume data may
not be detected.
If the USB memory device does not work
y y
properly, disconnect and reconnect it.
How fast a USB memory device is detected
y y
differs from device to device.
If the USB is connected in Standby Mode,
y y
that drive will automatically be loaded when
the display is turned on.
The recommended capacity is 1 TB or less
y y
for a USB external hard disk and 32 GB or
less for USB memory.
Any device with more than the recommend-
y y
ed capacity may not work properly.
If a USB external hard disk with a Energy
y y
Saving function does not work, turn the
hard disk off and on again to make it work
properly.
USB storage devices below USB 2.0 are
y y
supported as well. But they may not work
properly with videos.
A maximum of 999 folders or files can be
y y
recognized under one folder.
It is recommended you use a certified USB
y y
storage device and cable. Otherwise, a USB
storage device may not be detected or a
playback error may occur.
Only a USB memory device can be used
y y
to play back the files distributed and stored
by SuperSign Manager. A USB hard disk or
multi-card reader will not work.
Only an FAT 32 file formatted storage device
y y
can play back the files distributed and stored
by SuperSign manager.
A USB 3.0 storage device may not work.
y y
23
ENTERTAINMENT