LG 38WR50MS-B Owner's Manual page 69

68
CONTROLLING THE MULTIPLE PRODUCT
36. Fail Over Select (Command: m i)
To set the Fail Over function.
Transmission
[m][i][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: Auto
02: Manual
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
37. Fail Over Input Select (Command: m j)
To select fail over mode.
*Only available in Fail Over manual mode.
Transmission
[m][j][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
[ ][Data4][Cr]
Data 1 to 4(Priority 1 to 4)
60: RGB
70: DVI-D*
90: HDMI**
C0: Display Port***
* Use 0x70 as data for DVI-D input, regardless DVI-
D(PC) or DVI-D(DTV).
** Use 0x90 as data for HDMI input, regardless
HDMI-DTV or HDMI-PC
*** Use 0xC0 as data for Display Port input,
Regardless Display Port(DTV) or Display Port(PC)
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][Data4]
[x]
Data 1 to 4(Priority 1 to 4)
60: RGB
70: DVI-D****
90: HDMI*****
C0: Display Port******
**** Returns 0x70 as Data for DVI-D port, regardless
DVI-D(PC) or DVI-D(DTV).
***** Returns 0x90 as Data for HDMI port, regardless
HDMI-DTV or HDMI-PC.
****** Returns 0xC0 as Data for Display Port,
regardless Display Port(DTV) or Display Port(PC).
38. Reset (Command: f k)
To execute the Picture, Screen, Audio and Factory
reset function.
Transmission
[f][k][ ][Set ID][ ][Data][Cr]
Data 00: Picture Reset
01: S creen Reset (Only available for RGB
input.)
02: Factory Reset
03: Audio Reset
Acknowledgement
[k][ ][Set ID][ ][OK/NG][Data][x]
39. DPM Select (Command: f j)
To set the DPM (Display Power Management)
function.
Transmission
[f][j][ ][Set ID][ ][Data][x]
Data 00: DPM Select Off
01: DPM Select On
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
40. Temperature Value (Command: d n)
To read the inside temperature of the display.
Transmission
[d][n][ ][Set ID][ ][Data][Cr]
Data FF: Data should be always ff in hexadecimal.
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]