Savin 5308L Operating Instructions Manual page 82

SP No. Mode
160 SIDE ERS.
161 CENTER ERS.
162 HORIZONTAL ERS.
Entering decimal values in SP No. 160–162:
• Press the {Program} key to enter a decimal point.
• Press the {q} key to fix the value.
Changing The Settings Of Service Programs
Function
Adjust the default side edge margin width in Edge
Erase and Center/Edge Erase mode.
Note
Default:
• Metric Version: 5 mm
• Inch Version: 0.2"
Adjustable value:
• Metric Version: 2 – 20 mm
• Inch Version: 0.1" – 0.8"
Adjust the default center margin width in Center/
Edge Erase mode.
Note
Default:
• Metric version: 10 mm
• Inch version: 0.4"
Adjustable value:
• Metric version: 4 – 60 mm
• Inch version: 0.2" – 2.3"
Adjust the default horizontal edge (top and bot-
tom) margin in Edge Erase and Center/Edge
Erase mode.
Note
Default:
• Metric version: 5 mm
• Inch version: 0.2"
Adjustable value:
• Metric version: 2 – 20 mm
• Inch version: 0.1" – 0.8"
3
61