Table of Contents
Advertisement
D
Set your originals face up into the document feeder.
Note
When you use the optional 30 originals document feeder, the originals are
fed from the bottom of the stack. Make sure that the originals are set in the
correct sequence with the first original on the bottom.
E
Press the { { { { Start} } } } key.
F
Check the image position of the trial or proof print.
Note
If the image position is not correct, adjust it using the {Image Position} keys
(see
P.8 "Shifting The Print Image Position Forward Or Backward") or the
side table fine adjusting dial (see
The Right Or Left").
Printing Using The Optional 30 Originals Document Feeder
TSLH013E
TSLS012N
P.8 "Shifting The Print Image Position To
2
47
Advertisement
Table of Contents
