LG 27UD59-B.AUS Owner's Manual page 25

Table of Contents

Advertisement

Game Adjust
Response Time
FreeSync
Black Stabilizer
Color Adjust
Gamma
Color Temp
Red
Green
Blue
Six Color
Reset
Sets a response time for displayed pictures based on the speed of the screen.
For a normal environment, it is recommended that you use Middle. For a fast-
moving picture, it is recommended that you use high.
Setting to High may cause image sticking.
High
Sets the response time to High.
Middle
Sets the response time to Middle.
Low
Sets the response time to Low.
Off
Does not use the response time improvement feature.
Provides seamless and natural images by synchronizing the vertical frequency of
the input signal with that of the output signal.
NOTE
To use the FreeSync feature, a graphic card that supports FreeSync is
y
necessary.
Supported Interface: DisplayPort
y
For more information, refer to AMD website at http://www.amd.com/
y
FreeSync
Screen flickering may occur intermittently in a specific gaming
y
environment.
Extended
Enable wider frequency range of FreeSync function than
basic mode.
The screen may flicker during the game play.
Basic
Enable basic frequency range of FreeSync function.
Off
FreeSync function off.
You can control the black contrast to have better visibility in dark scenes.
Increasing the Black Stabilizer value brightens the low gray level area on the
screen. (You can easily distinguish objects on dark game screens.)
Reducing the Black Stabilizer value darkens the low gray level area and increas-
es the dynamic contrast on the screen.
The higher the gamma value, the darker the image becomes. Likewise, the lower
the gamma value, the lighter the image becomes. If you do not need to adjust
the gamma settings, select Off.
Custom
The user can adjust it to red, green, or blue by
customization
Warm
Sets the screen color to a reddish tone.
Medium
Sets the screen color between a red and blue tone.
Cool
Sets the screen color to a bluish tone.
You can customize the picture color using Red, Green, and Blue colors.
Meets the user requirements for colors through adjusting the color and satura-
tion of the six colors(Red_Hue, Red_Saturation, Green_Hue, Green_Satura-
tion, Blue_Hue, Blue_Saturation, Yellow_Hue, Yellow_Saturation, Magenta_
Hue, Magenta_Saturation, Cyan_Hue, Cyan_Saturation) and saving the
settings.
*Hue: Adjusts tone of the screen.
*Saturation: Adjusts the saturation of the screen colors. The lower the value,
less saturated and bright the colors become. The higher the value, the more
saturated and dark the colors become.
Returns the color settings to the default settings.
25

Advertisement

Table of Contents
loading

This manual is also suitable for:

27ud59p27ud59p-b27ud59-w27ud58-b27ud59-b27ud59

Table of Contents