Setting up the Monitor set
27UD59
Attaching the Stand Base
1
CAUTION
To protect the screen from scratches, cover the
y
surface with a soft cloth.
2
Stand Body
3
Stand Base
4
5
Screw Cover
WARNING
To avoid injury to your fingers or feet when you
y
Assembly the Stand Body and Base, you should
hold the Stand Base firmly.
CAUTION
Illustrations in this document represent typical
y
procedures, so they may look different from the
actual product.
Do not carry the monitor upside down by just
y
holding the stand base. This may cause the
monitor to fall off the stand and could result in
personal injury.
When lifting or moving the monitor, do not
y
touch the monitor screen. The force applied to
the monitor screen may cause damage to it.
Do not apply foreign substances (oils, lubricants,
y
etc.) to the screw parts when assembling the
product. (Doing so may damage the product.)
Applying excessive force when tightening
y
screws may cause damage to the monitor.
Damage caused in this way will not be covered
by the product warranty.
NOTE
Press the stand until the button reaches the top.
y
11