Table of Contents
Advertisement
IMAGE
Use this function to choose your desired aspect ratio.
•
•
Aspect Ratio
•
•
•
•
Image Position
•
•
Conceals the poor picture quality in the four edges. The
Overscan
greater the value, the more portion of the picture is
Adjustment
concealed while the screen remains filled and geometrically
accurate. Setting 0 means the picture is 100% displayed.
Phase
Adjusts the clock phase to reduce image distortion.
H.Size
Adjusts the horizontal width of the image.
Automatically determines the best picture timings for the
Auto
displayed image.
Selects "On" to enable the 3D function supported by DLP 3D
technology.
•
3D
•
If the 3D content is not displayed correctly, you can select a
3D Format
3D format that suits the 3D content you are viewing and
obtain the best result.
If you see a discrete or overlapping image while wearing DLP
3D glasses, you may need to execute "ENTER" to get best
3D L/R Invert
match of left/right image sequence to get the correct image
(for DLP 3D).
Auto: Keeps the image with original width-height ratio
and maximizes the image to fit native horizontal or
vertical pixels.
4:3: The image will be scaled to fit the screen and
displayed using a 4:3 ratio.
16:9: The image will be scaled to fit the screen and
displayed using a 16:9 ratio.
16:10: The image will be scaled to fit the screen and
displayed using a 16:10 ratio.
Press
to move the image left.
Press
to move the image right.
Press
to move the image down.
Press
to move the image up.
On: Select this item while using DLP 3D glasses, quad
buffer (NVIDIA/ATI...) graphics card and HQFS format file
or DVD with corresponding SW player. When this
function is enabled, Picture Mode cannot be adjusted.
Off: Turns off the 3D mode.
17
Advertisement
Table of Contents
