Table of Contents
Advertisement
Part names and functions
This section explains the functions of the parts of the unit.
Front panel
a
MAIN ZONE z key
Turns on/off (standby) the main zone.
Y
Zone2 can be turned on/off individually (p.95).
b
Standby indicator
Lights up when the unit is in standby mode under any of the
following conditions.
• HDMI Control is enabled (p.123)
• HDMI Standby Through is enabled (p.124)
• Network Standby is enabled (p.126)
• Bluetooth Standby is enabled (p.128)
c
AI indicator
Lights up when the SURROUND:AI is enabled (p.61)
d
Front display
Displays information (p.12).
a
b c
MAIN ZONE
INPUT
g
h
e
Remote control sensor
Receives remote control signals (p.6).
f
PURE DIRECT key
Enables/disables Pure Direct (p.66).
g
INPUT knob
Selects an input source.
h
Front panel door
For protecting controls and jacks (p.11).
i
VOLUME knob
Adjusts the volume.
d
e
10
En
f
PURE DIRECT
VOLUME
i
Opening the front panel door
To use controls or jacks behind the front panel door, gently
press the bottom of the door to open it. Keep the door closed
when not using controls or jacks behind the front panel door.
(Be careful not to trap your fingers.)
Advertisement
Table of Contents
