AEG COMFORTLIFT 9000 User Manual page 10

Hide thumbs Also See for COMFORTLIFT 9000:
Table of Contents

Advertisement

10
www.aeg.com
German de-
grees (°dH)
11 - 14
4 - 10
<4
1) Factory setting.
2) Do not use salt at this level.
Whether you use a standard detergent
or multi-tabs (with or without salt), set
the proper water hardness level to
keep the salt refill indicator active.
Multi-tabs containing salt
are not effective enough to
soften hard water.
How to set the water softener
level
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
the indicators
flash and the display is blank.
2. Press
• The indicators
are off.
• The indicator
• The display shows the current
setting: e.g.
3. Press
setting.
4. Press the on/off button to confirm
the setting.
6.3 The rinse aid empty
notification
The rinse aid helps to dry the dishes
without streaks and stains.
The rinse aid is automatically released
during the hot rinse phase.
When rinse aid chamber is empty, the
rinse aid indicator is turned on notifying
to refill rinse aid. If the drying results are
French degrees
(°fH)
19 - 25
7 - 18
<7
and
,
,
,
.
,
,
still flashes.
= level 5.
repeatedly to change the
mmol/l
Clarke de-
1.9 - 2.5
0.7 - 1.8
<0.7
satisfactory while using multi-tablets
only, it is possible to deactivate the
notification for refilling rinse aid.
However, for best drying performance,
always use rinse aid.
If standard detergent or multi-tablets
without rinse aid are used, activate the
notification to keep the rinse aid refill
indicator active.
How to deactivate the rinse
aid empty notification
The appliance must be in programme
selection mode.
until
1. To enter the user mode, press and
and
hold simultaneously
the indicators
start flashing and the display is
and
blank.
2. Press
• The indicators
are off.
• The indicator
• The display shows the current
setting:
notification is activated (factory
setting).
3. Press
= the rinse aid empty notification is
deactivated.
4. Press on/off to confirm the setting.
6.4 Acoustic signals
Acoustic signals sound when a
malfunction of the appliance occurs. It is
Water softener lev-
grees
el
13 - 17
5 - 12
< 5
1
and
,
,
,
.
,
,
still flashes.
= the rinse aid empty
to change the setting.
3
2
2)
until
and
and

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fsk73400p

Table of Contents