Special Instructions - Sunbeam MixMaster Series Manual

Table of Contents

Advertisement

mixer shuts down because of overheating, reset the speed
control dial to OFF and unplug unit from wall. Wait 1 minute
and plug back in. Do not plug unit back in unless speed
selection is set to OFF.
16. Any servicing, other than cleaning and user maintenance shall
be performed by an authorized service representative.
17. When mixing liquids, especially hot liquid, use a tall container
or make small quantities at a time to reduce spillage.
18. Don't Abuse Cord. Never carry the mixer by the cord or yank
it to disconnect from an outlet; instead, grasp the plug and
pull to disconnect.
T
U
I
hIS
NIT
S FOR
The motor of your Mixer is protected by a heat cured insulation.
This is a standard process. Due to the heat curing of the insulation,
you may experience an odor and possibly a slight wisp of smoke
from your mixer's motor. This effect will disappear after the first
few uses.

SPECIAL INSTRUCTIONS

F
P
OR
RODUcTS
To reduce the risk of electrical shock, this appliance is equipped
with a 3-prong plug. If you are unable to insert the plug into the
outlet, contact a qualified electrician to replace the obsolete outlet.
Do not attempt to defeat the safety purpose of the 3-prong plug
by modifying it in any way. Also, do not pull, twist or otherwise
abuse the power cord; instead, grasp the plug and pull to remove
from the outlet.
SAVE THESE INSTRUCTIONS
Welcome
Congratulations on your purchase of a Sunbeam
To learn more about Sunbeam
www.sunbeam.ca.
SAFETY
h
OUSEhOlD
P
URchASED IN ThE
®
English-3
U
O
SE
Nly
U.S.
AND
products, please visit us at
c
O
ANADA
Nly
Stand Mixer!
®

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents