Table of Contents
Advertisement
Using the water dispenser
It is normal for the first few glasses of water taken
·
from the dispenser to be warm.
If the water dispenser is not used for a long period
·
of time, dispose of first few glasses of water to obtain
fresh water.
1. Push in the lever of the water dispenser with your
glass. If you are using a soft plastic cup, pushing the
lever with your hand will be easier.
2. After filling the cup up to the level you want,
release the lever.
Please note, how much water flows from the
dispenser depends on how far you depress the lever.
As the level of water in your cup / glass rises, gently
reduce the amount of pressure on the lever to avoid
overflow.
If you slightly press the arm, the water will drip; this is
quite normal and not a failure.
Filling the water dispenser's tank
Water tank filling reservoir is located inside the door
rack.
1. Open the cover of the tank.
2. Fill the tank with fresh drinking water.
3. Close the cover.
Do not fill the water tank with any other liquid except
for water such as fruit juices, carbonated beverages
or alcoholic drinks which are not suitable to use in the
water dispenser. Water dispenser will be irreparably
damaged if these kinds of liquids are used. Warranty
does not cover such usages.
Some chemical substances and additives contained
in these kinds of drinks/liquids may damage the water
tank.
Use clean drinking water only.
9
Advertisement
Table of Contents
