Section 2: Installation
To mount your camera on a wall or ceiling, please follow the steps below. It is recommended that you configure the camera before mounting.
Step 1
Place the mount at the desired location, assuring that location of the power cord thread is also
at the desired location. Use a pencil to mark the holes.
Step 2
Using a 6 mm drill bit, drill two 25 mm deep holes over the pencil marks. For a plaster, drywall, or
concrete wall, insert the plastic anchors to support the screws first.
Step 3
Place the mount over the holes that are in the wall. Make sure to align the mount holes with the
holes in the wall. Use the supplied screws to attach the mount to the surface of the wall.
D-Link DCS-8515LH User Manual
Getting Started
Mounting the Camera
1
2
3
6