Device - D-Link DCS-8515LH User Manual

Section 3: mydlink
The Device page contains several options for you to configure your camera.
In the camera control page, after you have selected the specific camera you wish to configure, tap the
the camera's name to enter the Device page.
1
D-Link DCS-8515LH User Manual

Device

1 Device Photo
2
Device Name
3
Device Location
2
4 Wi-Fi
3
4
5
Microphone
5
6 Motion Setting
6
7 Night Vision
7
8 Pan-Tilt Control
8
button to the right of
Tap to add a customized photo of this device.
Tap to change the device's name.
Tap to change or add a new location for this
device.
Tap to change the wireless network this device
will use to connect to the Internet. Note: The
network must be the same as all your other
mydlink devices that you wish to use the same
account for.
Toggle sound recording on or off.
Tap to further configure sensitivity and active
area of motion detection of camera.
Click to change night vision detection to on/off/
auto.
Click to enter Pan-Tilt Control settings. Can be
set to either Tap or Swipe. Default is Swipe.
15