Setting Menu - Acer HA220Q User Manual

Setting Menu

The Setting menu is used for adjusting the general settings for current input signal such
as aspect ratio, OSD language, and etc.
1 Press the Menu button to bring up the OSD menu.
< >
2 Press the / button to select
Setting menu.
The following options are available in the Setting menu: Wide Mode, DDC/CI, OD,
ACM,
Input, Language, Auto Source ,Quick Start Mode and Reset.
< >
3 Press the / button to scroll through the Setting options, and press the Menu
button to enter its sub-menu.
< >
4 Press the / button to adjust/select the setting and press the Auto button to
confirm.
5 Wide mode: You can select which screen aspect you are using. The options are Full,
Aspect, and 1:1.
6 DDC/CI: Allows the monitor settings to be set through the software on the PC.
Note: DDC/CI, short for Display Data Channel/Command Interface,
which allows monitor controls to be sent via software.
7 OD: Select Off, Normal, or Extreme.
8 ACM: Turn ACM on or off. The default is off.
9 Input: Select the source from VGA,DVI, HDMI.
10 Language: Set the OSD menu language.
11 Auto Source:The default is "On", can support auto search for signal source in order.
12 Quick start mode: Select Off or On. The default is "Off". Turn on to speed up boot
speed.
Setting
Wide Mode
DDC/CI
OD
ACM
Input
Language
Au to So ur c e
Auto Sourc e
uic k Start Mode
Q Q Q Q Q Q Q
Reset
Setting and press the Menu button to enter the
Full
ON
Normal
OFF
VGA
English
Englis ON
ON
OFF
OFF
13