6
ASSEMBLING AND PREPARING
Detaching the stand body
1
Place the monitor's screen face down. To
protect the screen from scratches, cover the
surface with a soft cloth.
2
Using a screwdriver, remove the four screws
and detach the stand from the monitor.
Using the cable holder
Fix the Knob (Cable holder) to the
1
Hole(Hingebody).
Use one screw to fix the Cable Holder and
2
monitor set.
Close the Cable holder.
3
NOTE
The holes are used for wall mount bracket.
y
y
Varies depending upon your country or
y
y
model.
Mounting on a table
1
Lift the monitor and place it on the table in an
upright position.
Install at least 10 cm away from the wall to
ensure sufficient ventilation.
10 cm
10 cm
10 cm
10 cm