Page 1
Rated at a full 60 Watts, this new amp will deliver plenty of fat sustain and volume. With the convenient Impedance Selector switch, you will not find many tube amps that can compete with...
Page 2
I wanted to make an improvement over what the market has come to accept as the standard “Fender-type” power amp design for my new Tube Works model 4250 Tube Power amp. This old “Fender” design has been around for a long time, and though not bad, I felt there was significant room for improvement.
Page 3
2. Never use shielded speaker cables. Use only non-shielded, 18 gauge or lager speaker cables. 3. Use speakers capable of at least 80 watts RMS (although this amp is rated at 50 watts per channel, typical overdrive conditions require higher wattage speakers). MANUFACTURER IS NOT RESPONSIBLE FOR ANY SPEAKER FAILURE WHILE USING THIS EQUIPMENT.
Damage due to modification or abuse is excluded form this warranty. If service is required, you must contact Genz Benz Enclosures/Tube Works for a RETURN MERCHANDISE AUTHORIZATION NUMBER (RMA) by calling 480-941-0705. Whenever possible please use original packaging material for all returns, this will insure that the units are not further damaged in transit.
Need help?
Do you have a question about the ProValve 100 and is the answer not in the manual?
Questions and answers