Indicator Lights - Beko FFP3671 User Manual

Table of Contents

Advertisement

Indicator lights

There are three coloured indicator
lights located inside the appliance
which show the operating mode of
the freezer.
Amber Indicator
Illuminates when the thermostat
is set to max and stays on until the
fast freeze operation is deactivated
automatically or manually.
Fast-freeze operation is for freezing
fresh food (see Freezing Fresh Food
section).
Green Indicator
Illuminates when the appliance is
connected to the mains and will glow
as long as there is electricity present.
The green indicator does not give any
indication of the temperature inside
the freezer.
Red Indicator High Temperature
Alarm
After the appliance is turned on for
the first time the alarm is not active
for 12 hours (The red LED indicator is
switched off).
After this period of time the red LED
indicator is switched on in the
following
situations:
-If the appliance is overloaded with
fresh food -If the door is left open
for a long time by mistake.In these
situations the red LED indicator will
continue to be switched on until
the appliance reaches the preset
temperature. If the red LED indicator
is still switched on then wait for 24
hours before calling service.
Thermostat knob
The thermostat control is located on
the indicator light frame.
Important:
When you set to fast freeze (max) or
adjust the set temperature, there may
be a short delay before the compressor
starts to operate. This is normal and
not a compressor fault.
Freezing
Freezing food
You can use the appliance for
freezing fresh food as well as for
storing pre-frozen food.
Please refer to the recommendations
given on the packaging of your food.
• Attention
Do not freeze fizzy drinks, as the
bottle may burst when the liquid in it
is frozen.
Be careful with frozen products such
as coloured ice-cubes.
14
EN
3
4
2
1
MAX.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ffp3671b8690842392115

Table of Contents