Chipset - Gigabyte GA-A320M-D2P User Manual

2-6

Chipset

& IOMMU
Enables or disables AMD IOMMU support. (Default: Auto)
& Integrated Graphics
(Note)
Enables or disables the onboard graphics function.
The BIOS will automatically enable or disable the onboard graphics depending on the
Auto
graphics card being installed. (Default)
Disables the onboard graphics.
Disabled
& UMA Frame Buffer Size
Frame buffer size is the total amount of system memory allocated solely for the onboard graphics controller.
MS-DOS, for example, will use only this memory for display. Options are: Auto (default), 32M, 64M, 128M,
256M, 512M, 1G, 2G.
& SATA Mode
Enables or disables RAID for the SATA controllers integrated in the Chipset or configures the SATA controllers
to AHCI mode.
RAID Enables RAID for the SATA controller.
AHCI C onfigures the SATA controllers to AHCI mode. Advanced Host Controller Interface (AHCI)
is an interface specification that allows the storage driver to enable advanced Serial ATA
features such as Native Command Queuing and hot plug. (Default)
& APU SATA Port Enable (M2F_32G Connector)
Enables or disables the SATA controller integrated in the CPU. (Default: Enabled)
& Chipset SATA Port Enable (SATA3 0, 1, 2, 3 Connectors)
Enables or disables the SATA controller integrated in the Chipset. (Default: Enabled)
& APU SATA Port 0 (M2F_32G Connector)
Displays the information of the connected M.2 SATA device. The information appears only when an M.2
SATA device is installed.
& Chipset SATA Port 0/1/2/3 (SATA3 0, 1, 2, 3 Connectors)
Displays the information of the connected SATA device(s).
(Note) This item is present only when you install a CPU that supports this feature.
(Note)
- 30 -