Table of Contents
Advertisement
16
Using the Kensington Lock
The connector for the Kensington security system is located
at the bottom of the monitor.
For more information on installation and usage, refer to
the Kensington lock owner's manual or visit the website at
http://www.kensington.com .
Connect the monitor to a table using the Kensington
security system cable.
NOTE
The Kensington security system is optional. You can obtain
•
optional accessories from most electronics stores.
Detaching the Stand Body
1
Place the monitor's screen face down. To protect the
screen from scratches, cover the surface with a soft
cloth.
2
Remove the stand from the monitor by pressing the
button on the bottom center of the back of the monitor.
Installing the Wall Mount Plate
This monitor meets the specifications for the wall mount
plate or other compatible devices.
1
Place the screen face down. To protect the monitor
panel (screen), cover the surface with a soft cloth or the
monitor protection pad included in the product package.
2
Remove the four screws tightened on the back of the
monitor.
3
Place the wall mount plate onto the monitor and align it
with the screw holes.
4
Tighten the four screws using a screwdriver to fix the
plate to the monitor.
NOTE
•
The wall mount plate is sold separately.
For more information on installation, refer to the wall
•
mount plate's installation guide.
•
Be careful not to apply too much force while mounting the
wall mount plate as it may cause damage to the screen.
Advertisement
Table of Contents
