LG 32LW55A Owner's Manual page 15

Pin No.
41
42
43
44
45
46
47
48
49
50
51
Note :
1. All GND (ground) pins should be connected together to the LCD module's metal frame.
2. All VLCD (power input) pins should be connected together.
3. All Input levels of LVDS signals are based on the EIA 644 Standard.
4. #1~#6 & #8~#10 NC (No Connection) These pins are used only for LGD (Do not connect)
5. Specific pin No. #44 is used for No signal detection of system signal interface.
It should be GND for NSB (No Signal Black) during the system interface signal is not.
If this pin is H, LCD Module displays AGP (Auto Generation Pattern).
Symbol
NC No Connection
NC or GND No Connection or Ground
NC or GND No Connection or Ground
GND Ground
GND Ground
GND Ground
NC No Connection
VLCD Power Supply+12.0V
VLCD Power Supply+12.0V
VLCD Power Supply+12.0V
VLCD Power Supply+12.0V
LVDS PIN MAP GUIDE
Description
15
Note
4
5
2
2
2
2