Table of Contents
Advertisement
10
PRODUCT INSTALLATION
Precaution
Correct Method
Do not hold the screen area when holding the prod-
uct.
Use a soft cloth moistened with n-hexane to
remove dust or stains on the screen.
CAUTION
If a fixed image displays on the screen for a
y
long period of time, it will be imprinted and
become a permanent disfigurement on the
screen. This is image burn or burn-in and not
covered by the warranty.
To prevent image sticking, do not play a still
y
image for more than two hours.
Recommended operation time for optimum
y
performance and reliability is 12 hours or
less per day.
Incorrect Method
Do not lift up the product by holding a corner.
CAUTION
Make sure the power is disconnected before
y
moving or installing the product. Otherwise
electric shock may occur.
Wear working gloves when installing the
y
product. Do not use bare hands. Otherwise,
it may cause personal injury.
If you install the product on a ceiling or
y
slanted wall, it may fall and result in severe
injury.
Do not fasten the screws too tightly; this may
y
cause damage to the product and void your
warranty.
Use M3 x 4 mm screws to mount the
y
monitor. Any damages or injuries caused by
misuse or use of improper accessories are
not covered by the warranty.
Advertisement
Table of Contents
