Makita GA5021 Instruction Manual
Hide thumbs
Also See for GA5021:
- Instruction manual (144 pages) ,
- Technical information (11 pages) ,
- Instruction manual (72 pages)
Related Manuals for Makita GA5021
Summary of Contents for Makita GA5021
- Page 1 INSTRUCTION MANUAL Angle Grinder GA5020 GA5020C GA5021 GA5021C GA6020 GA6020C GA6021 GA6021C 008074 DOUBLE INSULATION IMPORTANT: Read Before Using.
-
Page 2: Specifications
) : 89 dB(A) ･ DOUBLE INSULATION Sound power level (L ) : 100 dB(A) Uncertainty (K) : 3 dB(A) ･ Wear safety glasses. Model GA5020C,GA5021,GA5021C and ･ Only for EU countries GA6021C Do not dispose of electric equipment together with household... - Page 3 Uncertainty (K) : 1.5 m/s EC Declaration of Conformity Makita Corporation responsible Model GA5020C manufacturer declare that the following Makita Work mode : surface grinding machine(s): Vibration emission (a ) : 9.5 m/s Designation of Machine: h,AG Uncertainty (K) : 1.5 m/s Angle Grinder Model No./ Type:...
-
Page 4: General Power Tool Safety Warnings
GEA005-3 Personal safety Stay alert, watch what you are doing and use General Power Tool Safety common sense when operating a power tool. Warnings Do not use a power tool while you are tired or under the influence of drugs, alcohol or WARNING Read all safety warnings and all medication. -
Page 5: Grinder Safety Warnings
22. Maintain power tools. Check for misalignment Threaded mounting of accessories must or binding of moving parts, breakage of parts match grinder spindle thread. and any other condition that may affect the accessories mounted by flanges, the arbour power tool’s operation. If damaged, have the hole of the accessory must fit the locating power tool repaired before use. - Page 6 13. Do not run the power tool while carrying it at Safety Warnings Specific for Grinding and Abrasive your side. Accidental contact with the spinning Cutting-Off Operations: accessory could snag your clothing, pulling the a) Use only wheel types that are recommended accessory into your body.
- Page 7 binding 22. Use the specified surface of the wheel to d) Do not restart the cutting operation in the perform the grinding. workpiece. Let the wheel reach full speed and 23. Do not leave the tool running. Operate the tool carefully re-enter the cut.
-
Page 8: Functional Description
Always be sure that the tool is switched off and switch trigger. Release the switch trigger to stop. • unplugged before adjusting or checking function For tool with type B switch trigger (For Models GA5021, GA5021C, GA6021, GA6021C) on the tool. Shaft lock 1. Lock lever 2. Switch trigger 1. - Page 9 Indication lamp Installing loop handle (Optional accessory) 1. Indication lamp CAUTION: Always be sure that the loop handle is installed • securely before operation. 1. Protrusion of loop handle 2. Matching hole in gear housing 008416 The indication lamp lights up green when the tool is plugged.
-
Page 10: Operation
For tool with locking screw type wheel guard Installing or removing depressed center grinding wheel/Multi-disc (optional 1. Wheel guard accessory) 2. Screw 3. Bearing box WARNING: Always use supplied guard when depressed • center grinding wheel/Multi-disc is on tool. Wheel can shatter during use and guard helps to reduce chances of personal injury. - Page 11 leading to personal injury. During the break-in period with a new wheel, do not work the grinder in the B direction or it will cut into the CAUTION: workpiece. Once the edge of the wheel has been After operation, always switch off the tool and wait •...
-
Page 12: Maintenance
If MAINTENANCE electric brake is not working well, ask your local Makita service center for repair. (For models GA5020/GA6020) To maintain product SAFETY and RELIABILITY, repairs, CAUTION: any other maintenance or adjustment should be Always be sure that the tool is switched off and •... - Page 16 Makita Corporation Anjo, Aichi, Japan www.makita.com 884710H221...