Connecting Your Camera - Swann NHD-816 Instruction Manual

Connecting your Camera

To connect your camera to the NVR, simply connect the supplied Ethernet cable to the LAN connection on the
camera then plug the other end of the cable (1) into one of the IP camera inputs on the back of the NVR.
DC 48V
It doesn't really matter which input you use as they are quite versatile and will be configured in a later step.
The Ethernet cable is the same at both ends so it doesn't matter which end plugs into the camera or NVR.
Note: For more information on how to connect and setup your camera consult the quick start guides and manual
for your NVR.
AUDIO
USB
HDMI
OUT
Microphone
Power
eSATA
VGA
LAN
Reset
LAN
1 3 5 7
2 4 6 8
1
3