®
Windows
1. Go to Control Panel > Network to
display the Network setup window
then select the Protocols tab.
. Select TCP/IP Protocol from the
Network Protocols list then click
Properties.
3. From the IP Address tab of the
Microsoft TCP/IP Properties
window, you can:
•
Select the type of network
adapter installed in your
system.
•
Set the router to assign IP
address automatically.
•
Manually set up the IP address,
subnet mask, and default
gateway.
RT-N12 B1
E6473_RT-N1-B1_Manual.indd
NT4.0
Chapter 3: Configuring the clients
4/11/11 1:40:57 PM