Yamaha Aventage MusicCast RX-A870BL Owner's Manual page 14

a
REMOTE IN/OUT jacks
For connecting to an infrared signal receiver/emitter that allows you to operate the unit and other
devices from another room (p.93).
b
TRIGGER OUT jack
For connecting to a device that supports the trigger function (p.38).
c
HDMI OUT 1-2 jacks
For connecting to HDMI-compatible TVs and outputting video/audio signals (p.30). When using ARC, TV
audio signal can also be input through the HDMI OUT 1 jack.
d
ANTENNA jacks
(Except for U.K., Europe, Australia and Russia models)
For connecting to FM and AM antennas (p.36).
(U.K., Europe, Australia and Russia models)
For connecting to FM and DAB antennas (p.36).
e
HDMI 1-7 jacks
For connecting to HDMI-compatible playback devices and inputting video/audio signals (p.31).
f
Wireless antenna
For a wireless (Wi-Fi) connection to a network (p.50) and a Bluetooth connection (p.78).
g
NETWORK jack
For connecting to a network with a network cable (p.37).
h
RS-232C terminal
This is a control expansion terminal for custom installation. Consult your dealer for details.
i
VOLTAGE SELECTOR
(General models only)
Selects the switch position according to your local voltage (p.39).
j
AC IN jack
For connecting the supplied power cable (p.39).
k
AUDIO 1-5 jacks
For connecting to audio playback devices and inputting audio signals (p.34).
l
PHONO jacks
For connecting to a turntable (p.34).
m
AV 1-2 jacks
For connecting to video/audio playback devices and inputting video/audio signals (p.31).
n
ZONE2 OUT jacks
For connecting to the external amplifier used in Zone2 and for outputting audio (p.92).
o
PRE OUT jacks
For connecting to a subwoofer with built-in amplifier or to an external power amplifier (p.38).
p
SUBWOOFER 1-2 jacks
For connecting to a subwoofer with built-in amplifier (p.23).
q
SPEAKERS terminals
For connecting to speakers (p.17).
14
En