Huawei Mate 20 Lite User Manual page 89

devices close together. Once a connection is established, the transmitting device will play an audio
prompt. After the prompt, please wait for the file transfer to complete. Received files are saved by
default to the Beam folder of your Files.
If there is an option to enable Read and write/P2P on the NFC screen, ensure that it is enabled.
Features may vary depending on your carrier.
Use NFC to Quickly Establish Connections between Devices.
Place the NFC detection areas of two devices close together to quickly establish a Bluetooth or Wi-Fi
connection between them. You can also use this method to establish a Wi-Fi Direct connection or
share a Wi-Fi hotspot without searching for devices, pairing and entering connection details manually.
Only SNE-LX1 supports NFC. Please keep the NFC area close to other devices or objects while
using the NFC function.
Using Bluetooth pairing as an example, enable NFC, Huawei Beam, and Bluetooth on both devices.
Open the Bluetooth pairing screen on both devices and place the NFC detection areas of devices close
together. When the sending device plays an audio prompt and content on the screen shrinks, follow
the onscreen instructions and touch the screen on the sending device to establish a Bluetooth
connection
If there is a Read and write/P2P switch on the NFC screen, ensure it is also enabled. Features
may vary depending on your carrier.
Device Connection
85