Sonos CR200 Manual page 17

Sonos Controller 200 7
Additional Settings
The following settings can be adjusted by selecting Settings→Controller Settings
from the Music Menu:
Controller Sounds. The Controller makes a clicking sound when you touch a
selection. You can choose to turn all sounds on, enable keyboard sounds only, or turn
all sounds off by touching Controller Sounds.
Light sleep. Your Controller will go into light sleep (the screen will turn off) to preserve
the battery life when it is unused for a specified period of time. When motion is
detected or a button is pressed, the Controller awakens immediately. Use the Sleep
Timer Docked (when seated in charging cradle) and Sleep Timer Undocked settings
to select the amount of time after which your Controller will enter light sleep.
Screen Brightness. Drag your finger across the slider to adjust the brightness of your
Controller screen.
Button Brightness. Drag your finger across the slider to adjust the brightness of the
buttons on your Controller. The button brightness is controlled by the light sensor, so
the button brightness will vary depending upon your environment (such as whether
it's night or day, or whether your are inside or outside your home.)
Motion sensor. The Controller has a motion sensor to automatically wake your
Controller when motion is detected. If you wish to disable the motion sensor, select
Motion Sensor from the Advanced Settings menu. You can choose to disable it all the
time (Off), or just when the Controller is seated in the cradle (Off While Charging.)
Language. Select Language from the Advanced Settings menu to change the
language setting for your Controller.