Troubleshooting - Philips DVP2800/F8 User Manual

Accessories supplied
• Remote control and one battery
• AV cables
• User manual
Laser specification
• Type: Semiconductor laser InGaAIP (DVD),
AIGaAs (CD)
• Wave length: 658 nm (DVD),
790 nm (CD)
• Output Power: 7.0 mW (DVD),
10.0 mW (VCD/CD)
• Beam divergence: 60 degrees

6 Troubleshooting

To keep the warranty valid, never try to repair
the player yourself.
If you have problems using this player, check the
following points before you request service. If
you still have a problem, register your player and
get support at www.philips.com/support.
If you contact Philips, you will be asked for the
model and serial number of this player. The
model number and serial number are on the
back of this player. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
No picture.
• The TV video input channel is not correctly
selected (see the TV's user manual).
• If you have changed a TV system setting,
switch back to the default setting:
1) Press to open the disc compartment.
2) Press SUBTITLE.
No sound output from the TV.
• Make sure that the audio cables are correctly
connected between this player and the TV.
No audio output from the loudspeakers of the
connected external audio device (for example,
stereo system, amplifier receiver).
• Make sure that the audio cables or coaxial
cable are correctly connected.
• Switch the external audio device to
correct audio input source.
Disc cannot be read.
• Make sure that this player supports the disc
(see "Specifications" > "Playable media").
• For a recorded disc, make sure that the
disc is finalized.
Files cannot be displayed or read.
• Make sure that the number of files or
folders does not exceed the supported
limit of this player (maximum 648 files or
299 folders).
• Make sure that this player supports these
files (see "Specifications" > "File format").
EN
13