Inserting A Pc Card (Pcmcia); Removing A Pc Card (Pcmcia) - Asus M3000N Hardware User Manual

Inserting a PC Card (PCMCIA)

1. If there is a PC Card socket protector, remove
it using the "Removing a PC Card" instructions
below.
2. Insert the PC card with the connector side first
and label side up. Standard PC cards will be
flush with the Notebook PC when fully inserted.
3. Carefully connect any cables or adapters
needed by the PC card. Usually connectors can
only be inserted in one orientation. Look for a
sticker, icon, or marking on one side of the con-
nector representing the top side.

Removing a PC Card (PCMCIA)

To remove the PC card, first remove all cables or adapters attached to the PC card, then double-click the
PC card icon on the Windows taskbar and stop the PC card you want to remove.
1. Press in the toggle eject button and release. The
recessed spring loaded toggle button will ex-
tend when pushed in and released.
Using the Notebook PC
2. Press the extended button again to eject the PC
Card. Carefully pull the ejected PC card out of
the socket.
4
Be sure the PC card is
level when inserting.
43