Table of Contents
Advertisement
With no need to point the remote control, using the keyboard
on the back or sending commands from another room -
changing the volume or switching channels - is easy.
Additionally, the TV can notify you when the battery power of
the remote control is low.
Pairing the remote control
For the remote control to communicate with the TV, both TV
and remote control should be paired with each other. Once
paired, you cannot use the remote control to control another
TV.
When you started the initial TV installation, the TV invited you
to press the OK key, and by doing so, the pairing was done.
When you switch off the TV, the pairing is stored. You can pair
up to 5 remote controls with this TV.
Repairing
You can pair another remote control with this TV.
The method to repair a remote control is different for a
remote control already paired with another TV or for a remote
control that is not paired yet.
• The remote control is paired with another TV
To pair, hold the Remote control close to the Philips logo
(about 10cm) and press the
same time. A message will appear if pairing is successful.
• The remote control is not paired yet
To pair, hold the Remote control close to the Philips logo
(about 10cm) and press OK. A message will appear if pairing is
successful.
For retail
To pair a new - not yet paired - TV with a remote control
which is already paired with another TV, hold the Remote
control close to the Philips logo (about 10cm) and press the
*
*
Red and
Blue key at the same time. A message will
appear if pairing is successful.
Batteries
The TV will notify you when the battery power of the remote
control is low.
To replace the batteries, open the battery compartment at the
back of the remote control.
1 - Use a toothpick or other small, blunt object and press the
small, square shaped release button to open the lid.
2 - Replace the old batteries with 3 type AAA-LR03-1.5V
batteries. Make sure the + and the - ends of the batteries line
up correctly.
3 - Reposition the battery cover and press it until it clicks.
Remove the batteries if you are not using the remote control
for a long time.
Dispose of batteries according to the end of use directives.
In Help, press L List and look up End of use for more
information.
TV / Watch TV
*
Red and
*
Blue key at the
Cleaning
Your remote control is treated with a scratch-resistant coating.
To clean the remote control, use a soft damp cloth. Never use
substances such as alcohol, chemicals or household cleaners
on the TV or remote control.
3.3
Watch TV
Channels
Switch channels
To watch TV channels, press t TV. The TV tunes to the
TV channel you last watched.
Alternatively, press h to open the Home menu and select
Watch TV and press OK.
Switch channels
To switch channels, press CH+ or CH-. If you know the
channel number, type in the number with the number keys.
Press OK after you entered the number to switch channel
immediately.
To switch back to the previously tuned channel, press b.
To switch to a channel from a channel list
While watching a TV channel, press L LIST to open the
channel lists.
Select a list in the row of tabs.
In a channel list, navigate to a TV channel or radio station. With
the highlight on its icon, press OK to switch to the TV channel
or listen to the radio station.
The channel list can have several pages with channels. To view
the next or previous page, press CH- or CH+.
To close the channel lists without switching channel, press L
LIST again.
Radio channels
21
Advertisement
Table of Contents
