Table of Contents
Advertisement
Camera is slow to respond to shutter-release button: Select Off for Custom Setting
d4 (Exposure delay mode; 0 327).
Only one shot taken each time shutter-release button is pressed in continuous release
mode: Turn HDR off (0 190).
Photos are out of focus:
• Rotate focus-mode selector to AF (0 97).
• Camera unable to focus using autofocus: use manual focus or focus lock
(0 105, 108).
Full range of shutter speeds not available: Flash in use. Flash sync speed can be
selected using Custom Setting e1 (Flash sync speed); when using
compatible flash units, choose 1/250 s (Auto FP) for full range of shutter
speeds (0 331).
Focus does not lock when shutter-release button is pressed halfway: Camera is in
focus mode AF-C: use the center of the sub-selector to lock focus (0 105).
Can not select focus point:
• Unlock focus selector lock (0 103).
• Auto-area or face-priority AF selected for AF-area mode; choose another
mode (0 53, 100).
• Camera is in playback mode (0 241).
• Menus are in use (0 289).
• Press shutter-release button halfway to start standby timer (0 44).
Can not select AF mode:
• Rotate focus-mode selector to AF (0 97).
• Select No restrictions for Custom Setting a12 (Autofocus mode
restrictions, 0 320).
Can not select AF-area mode: Rotate focus-mode selector to AF (0 97).
Image size can not be changed: Image quality set to NEF (RAW) (0 90).
Choose image size using NEF (RAW) recording > Image size option in
shooting menu.
Camera is slow to record photos: Turn long exposure noise reduction off
(0 308).
Flicker or banding appears during live view or movie recording: Choose an option for
Flicker reduction that matches the frequency of the local AC power
supply (0 363).
n
440
Advertisement
Table of Contents
