Symbols - Ryobi RY5018 Operator's Manual

The following signal words and meanings are intended to explain the levels of risk associated with
this product.
SYMBOL SIGNAL
DANGER:
WARNING:
CAUTION:
NOTICE:
Some of the following symbols may be used on this tool. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to operate the tool better and safer.
SYMBOL
Safety Alert
Read Operator's Manual
Wear Eye, Hearing, and
Head Protection
Keep Tool Away from
Electrical Lines/Keep
Bystanders Away
SAFE-T-TIP™ Nose
Guard
Operate With Two Hands Hold and operate the saw properly with both hands.
One Handed
Bar Nose Contact

SYMBOLS

MEANING
Indicates a hazardous situation, which, if not avoided, will result
in death or serious injury.
Indicates a hazardous situation, which, if not avoided, could
result in death or serious injury.
Indicates a hazardous situation, that, if not avoided, may result
in minor or moderate injury.
(Without Safety Alert Symbol) Indicates information considered
important, but not related to a potential injury (e.g. messages
relating to property damage).
NAME
Indicates a potential personal injury hazard.
To reduce the risk of injury, user must read and understand
operator's manual before using this product.
Wear eye protection with side shields marked to comply
with ANSI Z87.1 as well as hearing and head protection
when operating this equipment.
DANGER! Risk of electrocution! Keep tool 50 feet away
from electrical lines. Keep all bystanders at least 50 ft.
away or twice the height of the largest trees in the felling
area when felling.
The SAFE-T-TIP™ nose guard on the guide bar helps
prevent kickback.
Do not operate the saw using only one hand.
Avoid bar nose contact. Tip contact may cause the guide
bar to move suddenly upward and backward, which may
cause serious injury.
Page 5 — English
DESIGNATION/EXPLANATION