Advertisement
Remote Button Function Showing
Standby and Start Button, when device is working normally, it will go to Standby
status if you press the button and also the Standby Led Status Light will go bright; when
press the button again, the device will back to normal working status and the Standby LED
Light at device will also off.
EDID：
2CH： EDID 2.0 Button. After press the 2.0 button, the 2.0CH LED light will go
bright, and the device will change to support only LPCM 2.0 Audio Format; the source will
output LPCM 2.0 audio as the supplied info from the device.
5.1CH： EDID 5.1 Button. After press the 5.1 button, the 5.1CH LED light will go bright,
and the device will change to being compliant with Dolby-AC3,DTS ,LPCM2 .0 Audio Format;
the source will output the best audio format as the supplied info from the device and the
source film supported audio format.
Advertisement
