Monacor HDAW-203 User Manual page 3

INTRODUCITON
Feature：
 One HDMI Inputs switch to one HDMI Output
 Support 4K
 By pressing the button at device can do switch between the Audio Extract Mode and
Audio Embed Mode
 Coax Port and LR Port can be used as the Input/Output at Audio Extract and Audio
Embed mode to reduce the number of port to let device become more simple and
easy-use.
 At Audio Extract Mode, Digital Port of Toslink and Coax can support 192Khz Sampling
Rate(LPCM2.0 Audio Format)
 At Audio Extract Mode, it supports 2.0CH,5.1CH and Pass Three Audio EDID Set.
 At Audio Embed Mode, Digital Audio Port of Toslink and Coax supports max 96KHz
Sampling Rate ( Only when input audio source is LPCM 2.0 Audio Format), also it
supports Dolby-AC3 and DTS Audio Format Input. The analog audio (LR Channel)
supports max 2V P-P analog audio input.
 It supports ARC. The ARC audio can output by the digital port of Toslink and Coax and
the analog LR audio port(analog audio only can output when the ARC Audio source is
LPCM 2.0 Audio format).
 Support Power Off Memory Function, it can remember the last working state. When
power on again, it can back to the last working state.
 LED Status Light shows clearly the working state.
 HDMI Input and Output distance can be up to 8m using the AWG26 standard HDMI
Cable.
 No Loss of Signal
 Easy-Install
 DC5V1A Power Adaptor