Table of Contents
Advertisement
Picture control
Auto Picture Control
You can select picture modes programmed at
factory as you prefer.
Using the APC button
1. Press the APC button.
2. Press the APC button to select
or
Optimum, Soft
User
3. Press the ENTER(
) button to exit.
A
Adjusting the Picture
This is the function to manually adjust the desired
picture levels (
Contrast, Brightness, Color,
Sound control
Enjoying the Stereo/SAP Broadcast
This TV set can receive MTS stereo programs and
any SAP (Secondary Audio Program) that
accompanies the stereo program, as the system to
be transmitted one additional sound signal as well
as the original one. MTS function doesn't operate
in the video mode.
Using the MTS Button
1. Press the MTS button to select your desired
MTS mode.
Each time you press this button, the
STEREO
or
SAP
mode appears in turn.
2. Press the ENTER (
) button to exit.
A
Note:
• Stereo or SAP can only be received if the TV
station transmits those signals, even though you
have selected
or
STEREO
• Mono sound is automatically received if the
broadcast is only in Mono; even though
or
SAP
has been selected.
• Select
MONO
if you want to listen to mono
sound in remote fringe areas during stereo/SAP
broadcasting.
Auto Sound Control
You can enjoy the best sound without any special
adjustment because this TV set automatically
adjusts the sound appropriate to viewing program
character by self-intelligence.
AVL (Auto Volume Leveler)
AVL automatically keeps on an equal volume level
even if you change channels.
Clear,
.
MONO
,
.
SAP
STEREO
7
Sharpness, Tint
) of the screen as you like. If the
picture you set is not satisfactory, you can select a
factory preset picture. In the broadcasting system
PAL-M/N, the picture item
XD (some models)
XD is LG Electronic's unique picture improving
technology to display a real HD source through an
advanced digital signal processing algorithm.
Note : When selecting APC options (Clear,
Optimum and Soft), XD is automatically
change to On.
Adjusting the balance
1. Press the MENU button and then use
button to select the Sound menu.
2. Press the
and then
G
Balance
.
3. Press the
and then
G
F
balance level.
4. Press the MENU button to exit.
Adjusting the DBS (Dynamic
Bass Sound)(some models)
1.Press the MENU button and then use
button to select the Sound menu.
2. Press the
G
and then
DBS
.
3. Press the
and then
G
D
DBS level.
4. Press the MENU button to exit.
X-WAVE (some models)
Note:
1. If the reception is poor or weak, select a
different frequency.
2. For best results, there should be no more that
19ft between the TV and FM Receiver.
3. In certian areas, the FM transmitter ability may
be weak, such as near a broadcast tower.
4. The reception sensitivity may depend on the
kinds of receiver (FM radio).
Turbo Sound (some models)
With this function sound will be more
emphasized and amplified than normal sound.
You can enjoy the Turbo sound so much better
than normal sound.
Tint
is not displayed.
/
D
E
button to select
D
/
E
button to adjust the
G
/
/
D
E
button to select
D
/
E
button to adjust the
E
/
Advertisement
Table of Contents
