Taking Care Of Your Appliance; In The Event Of Problems - Rowenta BALNEA SILENCE SO6220 Manual

Button 1 "STAND-BY" : Switching off the appliance (a
cooling cycle of a few seconds is carried out automa-
tically each time before it is switched off; during this
cycle, the button flashes)
Button 2 "COOL" : Cold ventilation position.
Button 3 "SILENCE" : "Silence" position, 1200W venti-
lated and regulated.
Button 4 « MAX » : 2400W position ventilated and re-
gulated.
Button 5 "AUTO BOOST" : Automatic operation mode
- 10 minutes: 2400W ventilated unregulated
- 20 minutes: 1200W ventilated and regulated (depending on the position of the button 6)
- Stops automatically after the 30 minutes of operation.
Button 6 : Thermostat (on the SILENCE, MAX and AUTO-BOOST functions).
- Adjust the temperature setting, according to your own comfort.
- Frost-free setting
in a normally insulated room, whose volume corresponds to the power of your appliance.

TAKING CARE OF YOUR APPLIANCE

• The appliance must be unplugged and left to cool down before carrying out any work on it.
• Do not clean it with abrasive or corrosive products.
• Clean with a damp cloth.
• Clean the air inlet and outlet grids at least once a year (with a vacuum cleaner if necessary).
STORAGE
• It is extremely important that the unit be allowed to cool down before it is put away.
• The power cord can be rewound for storage.
• When you are not using your appliance, store it in a dry place.

IN THE EVENT OF PROBLEMS

• Never dismantle your appliance yourself. A poorly repaired appliance may be dangerous for the user.
• Stop using your appliance and contact an Authorized Service Centre if :
- your appliance has fallen
- it does not work correctly
• Before contacting one of our Approved Service Centres (see enclosed list), ensure that:
– the appliance is set to normal operating mode;
– the air inlet and outlet grills are totally clear.
ENVIRONMENT PROTECTION FIRST!
Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a local civic waste collection point.
: This setting enables you to automatically maintain the temperature above 0°C
1
6
9
2 3
4
5
GB