Home Network; Wireless Screencasting - Philips 50PFL5602 User Manual

To obtain a more detailed electronic copy of this User Manual or to access live chat support, go to www.philips.com/support
Home
Internet
Network
Connection Test is successfully
Pass Pass
completed.
Connection Test for Home Network
Fail - failed. Check the Connection
Settings.
Connection Test for Internet failed.
Pass Fail
Check the Connection Settings.
• If the Connection Test for Internet passes, Speed Test will
Start Automatically.
3
Press OK to go to the list on Network Status
Confirmation screen.
For Wireless Connection
Network connection test
IP address 192, 168, 1, 1
Subnet mask 255, 255, 255, 0
Default gateway 192, 168, 1, 254
Primary DNS 0, 0, 0, 0
0, 0, 0, 0
Secondary DNS
SSID AP Name
Authentication Done
For Wired Connection
Network connection test
IP address 192, 168, 1, 1
Subnet mask 255, 255, 255, 0
Default gateway 192, 168, 1, 254
Primary DNS 0, 0, 0, 0
0, 0, 0, 0
Secondary DNS
Note(s)
• If the Connection Test for both Home Network and Internet
Pass, you are ready to use Net TV or Network Upgrade
Functions using the Internet without making any Additional
Settings.
• If the Connection Test fails, check if the Ethernet Cable is
connected to this TV properly or if you have entered All the
required details for the Wireless LAN Connection properly.

Home network

You can turn your TV into a Digital Media Renderer (DMR), which
can play video, music and photo files stored on certified home
media servers connected to your home network.
1
Press and use
2
Use to Select Network settings, then press OK.
3
Use to Select Home network, then press OK.
4
Use to Select the item you want to adjust, then
press OK.
Off
Renderer
On
Change the display name of this TV to other
Renderer name
devices on the Home Network.
Description
Back
Back
to Select Setup, then press OK.
Disable DMR.
Enable this unit to play files using
DMC.

Wireless Screencasting

You can wirelessly cast or mirror the screen of your
smartphone, tablet or PC to the TV directly using
Wireless Screencasting.
Using Wireless Screencasting
1
Press and use
Screencasting, then press OK.
• Wireless Screencasting mode screen appears.
The TV is now ready to accept a connection from your source device.
If you want to exit, please press "BACK" key.
If you want to manage connected device history, please press "OPTIONS".
2
Activate Wireless Screencasting feature on your
device.
• For the operation of your device, please check the
instruction manual of the device.
• Select Your TV name on your device if needed.
• If PIN code is required on your device, please enter the
8-digit code appearing in the left-hand side of the TV
screen.
3
Once connected, the screen of your device will
appear on your TV screen.
•
Press INFO to display Your Device name at the bottom
of TV screen.
•
Press or OK to pause playback. Press
to resume playback.
Using Wireless Screencasting device list
In Wireless Screencasting device list, you can find the
connected devices.
1
Press OPTIONS on Remote when Wireless
Screencasting mode is on the TV screen.
• Only the Connected Device names are listed.
• It will be sorted from newest connection to oldest
connection. A maximum of 64 connections can be
recognized.
•
If you would like to delete a listed connection, press
to Select the device name, then press OK first. Once the
confirmation message appears, please use
Yes, then press OK.
9
to Select Wireless
PHILIPS_Smart_TV
Your TV name
or OK again
to Select
Continued on next page.