Changing Picture Format - Philips 50PFL5602 User Manual

To obtain a more detailed electronic copy of this User Manual or to access live chat support, go to www.philips.com/support
Cursor
Horizontal position to move PC screen left
to move PC screen
Vertical position
down
Changing Sound Settings
1
Press and use
OK.
2
Use to Select TV settings, then press OK.
3
Use to Select Sound, then press OK.
Auto sound
Picture
Equalizer
Sound
Balance
Features
Installation Sonic Emotion Premium
Accessibility Auto volume leveling
TV speakers
Headphone volume
Digital output format
Delta volume
4
Use to Select the item you want to adjust, then
press OK.
• The following sound settings can be configured.
Depending on the sound source, some sound settings
are not available.
to Select the desired Setting, then press OK
(Personal, Standard, Vivid, Sports, Movie,
Auto sound
Music and News)
to Select the specific Frequency using
Equalizer
and use
OK
Adjusts the balance of the Right and Left
Balance
speakers to Best suit your listening position.
Off
Sonic
Emotion
On
Off
Dialog
Sonic Enhancement
On
Emotion
Premium
Off
Bass
Enhancement
On
Off
Absolute
3D Sound
On
Off
Auto volume leveling
On
Cursor
to move PC screen right
to move PC screen up
to Select Setup, then press
to Adjust the Level, then press
to set Sonic Emotion to Off
to set Sonic Emotion to On
to set Dialog Enhancement to
Off
to set Dialog Enhancement to
On
to set Bass Enhancement to Off
to set Bass Enhancement to On
to set Absolute 3D Sound to Off
to set Absolute 3D Sound to On
to Remove the Auto volume
leveling
to Reduce Volume Differences
between the TV Commercials
and the Programs
TV speakers
Headphone volume Adjusts headphone volume.
Digital output format
Delta volume

Changing Picture Format

Display Modes can be Selected when your TV receives
a 16:9 or 4:3 Video Signal.
Three types of Display Modes can be Selected for a PC Input
Signal.
Press FORMAT Repeatedly to Switch the TV Aspect Ratio.
For 16:9 Video signal (2160p)
,
Unscaled
For 16:9 Video signal (not 2160p)
Automatic
Full
Other than DTV and HDMI connected
devices, enlarges the picture to Best fit the
Automatic screen. DTV and HDMI connected devices
display the picture at its original size.
The subtitles may remain visible.
Displays a 16:9 picture at a 4:3 size; the
4:3 picture is shortened horizontally. Sidebars
appear on both edges of the screen.
Displays a 16:9 picture that is stretched
Wide screen
horizontally and vertically.
Displays a 16:9 picture at its original size.
Unscaled
Displays a scaled 16:9 picture. Bars appear
on both the Upper and Lower portions of
Full
the screen depending on the type of video
signal.
11
No Output Sound from the
Off
Unit's Speakers
to Output Sound from the Unit's
On
Speakers
to control Audio Output from
Speakers
your connected HDMI Link
EasyLink
devices
to Output PCM format
PCM
to Output Audio in its native
format as Bitstream to
Bitstream
connected Audio receiver
Provides the ability to set a custom volume
level for the current channel or input source.
If the source volume is too loud, set a
negative value (-1 to -12)
If the source volume is too soft, set a positive
value (+1 to +12)
Full
4:3
Wide screen
Continued on next page.