Tidying Cables - LG 47LN572Z-T Owner's Manual

22
ASSEMBLING AND PREPARING
CAuTION
y Disconnect the power first, and then move or
install the TV. Otherwise electric shock may occur.
y If you install the TV on a ceiling or slanted wall, it
may fall and result in severe injury.
Use an authorised LG wall mount and contact the
local dealer or qualified personnel.
y Do not over tighten the screws as this may cause
damage to the TV and void your warranty.
y Use the screws and wall mounts that meet the
VESA standard. Any damages or injuries by
misuse or using an improper accessory are not
covered by the manufacturer's warranty.
NOTE
y Use the screws that are listed on the VESA
standard screw specifications.
y The wall mount kit includes an installation manual
and necessary parts.
y The wall mount bracket is not provided. You can
obtain additional accessories from your local
dealer.
y The length of screws may differ depending on the
wall mount. Make sure to use the proper length.
y For more information, refer to the manual supplied
with the wall mount.
y When attaching a third-party wall mounting
bracket to the TV, insert the wall mount inner
spacers into the TV wall mount holes to move
your TV in vertical angle. Please make sure not
to use the spacers for LG wall mounting bracket.
(Only LA64**)
Wall Mount Inner Spacer

Tidying cables

1 Gather and bind the cables with the Cable Holder
and the Cable Management.
2 Attach the cable management to TV.
(Only LA62**, LA64**, LA66**, LA71**,
LN61**)
Cable Management
(Only LA69**, LA74**)
Gather and bind the cables with the Cable Holder.
(Only LN570*, LN572*)
CAuTION
y Do not move the TV by holding the cable holders,
as the cable holders may break, and injuries and
damage to the TV may occur.
LN56**, LN571*,
Cable Holder
Cable Holder
Cable Management
Cable Holder