Panasonic DMP-BDT281 Operating Instructions Manual page 21

[BDT281/280] [BDT185/184/181/180]
Using the Digital Media Controller
You can use a smartphone or tablet as the Digital
Media Controller (DMC) to playback contents
from DLNA server on the Renderer (this unit).
Possible applications:
Renderer
Renderer
* DMC compatible software should be installed.
Preparation
Perform steps 1 and 2. (
3 Perform the "Remote Device Settings".
( 28)
≥ You can register up to 16 devices.
Playback
*
Server
*
Controller
*
Server
+
Controller
20)
- 21 -
1
Press [HOME].
2
Select "Network".
3
Select "Home Network".
4
Select "Media Renderer".
5
Select "Home Network" or "Wi-Fi
[BDT281/280]
Direct" and press [OK], then follow the
indications on the screen.
6
Operate the DMC compatible devices.
To exit from Media Renderer screen
Press [HOME].
[BDT281/280] [BDT185/184/181/180]
About DLNA and Media Renderer
For more details, refer to the following website and the
operating instructions for each of the equipment.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
≥ [BDT281/280] Wi-Fi Direct connection while using Home
Network feature is only temporary, and the network
connection method returns to the original setting when
exiting.
≥ [BDT281/280] Depending on the device or connection
environment, the data transfer rate may decrease.
≥ Depending on the contents and the connected equipment,
playback may not be possible.
≥ Items displayed in grey on the display cannot be played
back by this unit.