Table of Contents
Advertisement
Available languages
Available languages
4.2 - INSTALLATION OF DMX BOX
Without the DMX box the projector will work only in ON/OFF mode. In order to use all the
automatic and DMX possibilities, the box must be fixed to the bracket (on the left or on the
right it is the same) and connected to the projector with the USB cable included.
4.3 - CONNECTION TO THE MAINS
The device must be connected to a power supply system with a proper earth system.
Moreover, it is recommended to protect power supply lines of the products from indirect
contact and / or shorting to earth by using appropriately sized anti electrical shock switch.
The electrical connection must be carried out by a qualified electrician. Ensure that the
mains frequency and voltage correspond to those for which the device is designed, as shown
in the electrical data label.
17
Advertisement
Table of Contents
